Step 1
Attach the male half of the lock post set to the gate, or in the case of a double door, to the gate of choice.

Step 2
Attach the female receiver post to the other gate or the opposite post, remembering that once position has been decided, trim the lower pin ONLY, to 3 1/2".

IN THE CASE OF DOUBLE DOORS

Lock the gates together. Position them side to side so the lock is accessible from the street side.

Then mark the floor, drill a 3/4" hole, insert the plunger. Similarly, locate& trim if required, the overhead pin plate.

Attach to frame above door.